uTestMic Universal Measurement Microphone

uTestMic is a professional-grade, calibrated, USB-connected test & measurement microphone that includes an audio output.

uTestMic is compatible with any device that supports USB audio, including smart phones, tablets, and computers. It is equipped with a USB A connector, and includes adapters for USB micro and USB C connections. It also works with the Apple USB to Lightning and USB to 30-pin adapters.

Every unit is tested and calibrated at the factory, and a unique individual calibration file is stored in the cloud. To apply this file, if you are using AudioTools, just go to the microphone setup page and tap the “Get File” button and enter the serial number. For other platforms, click this link to open our uTestMic Calibration File tool.

Studio 6 Digital products are dispatched from the USA, please allow 2 - 3 weeks for delivery.


Hardware

uTestMic is designed to work with hardware devices that support USB audio through the use of standard USB audio class device drivers.

The blue LED on the bottom lights when a USB audio connection has been established with the host device.

The audio output connector is a standard 1/8” (3.5mm) stereo jack.

uTestMic has a 2m cable with attached USB A connector. It ships with adapters for USB micro and USB C. To use uTestMic with an iOS device that has a Lightning or 30-pin connector, an adapter such as the Apple Camera Connection kit is required.

It is possible to extend the USB Cable length using a standard USB A extension cable. Lengths up to 5m have been tested successfully,

App Compatibility

uTestMic is compatible with AudioTools, and many other iOS Apps which record or process audio. It is also compatible with audio apps running on any hardware platform that support audio input from a USB audio device, such as Smart or Spectrafoo on Windows, and any of a number of apps that run on Android that accept input from a USB audio source. Check with your app developer if you are unsure as to whether their app will work with a USB audio input device.

Installation

To install uTestMic, plug it into the USB connector of any compatible device. Once uTestMic is plugged in, it will be active and available as a USB audio source. On mobile platforms, uTestMic will become the default audio input and output source. On Mac and Windows, you must select uTestMic as the audio source using the Mac System Preferences pane, or in Windows using Device Manager.

Note that it takes approximately 3 seconds for uTestMic to be recognized by your iOS device. So, if you plug uTestMic in while AudioTools is running, there will be a slight delay until it can be used.

Calibration

Every uTestMic is factory calibrated and the calibration level and frequency response correction data is stored in a file on the SSD server. To access this file, follow these steps:

AudioTools

  • Make sure you are running AudioTools 10.22 or later and connected to the internet
  • Plug in uTestMic
  • Navigate to the Settings->Microphone Setup page
  • Tap the i in the circle on the right for the uTestMic entry
  • Tap the Get File button
  • Enter the serial number, like LNxxxxx with no spaces
  • The file will be downloaded and installed

That’s it, you just need to do that once per iOS device.

Other Applications

You can download the actual calibration file and use it, just check with your software vendor to see how to load the file. Here’s how to get the file:

  • Use this link to open a new browser window with our calibration file download tool
  • Enter your serial number, like “LNxxxxx” with no spaces
  • Click the link to the file that appears to download the file

The file is a plain text file in the industry standard FRD format that includes entries for frequencies and dB correction values. These values are to be subtracted from the mic’s output to create a flat response curve.

Power

uTestMic is powered over USB, directly from the attached device. If you wish to also power your mobile device while using uTestMic, you can use any standard USB powered hub. Just plug uTestMic into the hub, and plug the output cable into your mobile device.

Audio Output

uTestMic includes an 1/8” (3.5mm) stereo output jack. This will be used as the audio output for all mobile devices, and can be used on computers by selecting it as the audio output source.

Note that this is a line-output signal, and is not designed to drive headphones.

uTestMic

  • $365.00

  • Ex Tax: $331.82